Mount Image Pro™ Version 4 - English
__________________________________
Mount Image Pro v4 has the ability to mount a remote physical or logical drive over a TCPIP network.
Running the MIPv4Servlet on the remote PC
Run the MIPv4Servlet on the remote PC;
The Mount Image Pro v4 TCPIP Servelet, "MIPv4TCPIPServlet.exe", is located in the Mount Image Pro v4 program installation folder: "C:\Program Files\GetData\Mount Image Pro v4\".
The MIPv4TCPIPServlet.exe must be run as Administrator. The MIPv4TCPIPServlet will display the IP address of the computer on which it is installed:
Connecting to the MIPv4Servlet with Mount Image Pro v4
Run Mount Image Pro Version 4:
Select the FILE / MOUNT in the main program screen, or click the 
button to open the Device Selection window;
In the device selection window, click 
to select the required image file;
Enter the IP address of the remote server into the "TCPIP Address" field;
Click the 
button to connect to the remote MIPv4Servlet;
You should then see a list of available drives. Select the drive you wish to mount and select OK:
The Drive Selection window will then display showing the selected drive as a under the "Networked" list. Select the drive and press the Mount Disk or Mount Filesystem button to mount the drive.
Select the drive to mount, the press the "Mount Disk" or "Mount Filesystem" button.